GET THE FORCE USA G15 HERE(SAVE USING MY LINK): https://www.forceusa.com/stevie

OVERVIEW

Combining an entire commercial gym into one machine and constructed of 11-gauge rolled SteelForce tubing, the Force USA G15 All-In-One Trainer offers an 8-in-1 strength training system with a minimal footprint. In fact, the exterior measurements are just 87”(H) x 80” (W) x 53” (D) while the interior measurements are 80” (H) x 40” (W) x 50” (D). Featuring a power rack, Smith machine, multi-grip pull-up bar, weight stacks, plate storage, 18 attachments and an interchangeable cable pully ratio, the Force USA G15 really does have it all.

Power Rack

A true all-in-one trainer, the power rack on the G15 is built to accommodate commercial-grade J-Hooks and Safeties, allowing you to adjust the half-rack to virtually any position you desire. Altogether, the front-facing uprights have 60 adjustment points at one-inch intervals. Thanks to the laser-etched numbering, you can quickly and easily fasten your J-Hooks, Safeties or Monolift attachments to the height that you desire. Meanwhile, the removable rubber barbell protector sleeves serve to protect the barbell knurling while also extending the life of the barbell itself. Jammer arms are also available as a part of the upgrade kit.

Smith Machine

Whether you are looking to increase your upper body strength with bench presses or work on your lower body with squats, the Smith machine has you covered. With its fixed barbell system, the Smith machine is capable of accepting Olympic weight plates of up to 772 pounds. The Smith machine also features an adjustable spring-loaded safety for additional protection.

To help keep your workout as safe and effective as possible, the Smith machine features commercial-grade guide rails, linear bearings and reinforced bushings to keep your movements natural and ultra-smooth. Meanwhile, the counterbalance system starts off at zero pounds and allows for re-racking along 14 different racking levels, making it a good system for individuals of any fitness level. While this does result in a little bit of inertia within the system, this is a minor downside when compared to the benefits that the system provides.

For additional safety, the system also features a safe lock and release mechanism along with a safety catch. This allows you to max out your workout without needing a spotter. You can also purchase SuperBands separately to add even more weight to your workout.

Upgraded Smith Machine Safeties

The Force USA G15 is built with springs and upgraded hooks. This is an improvement over the G3 model, which just had a rubber stop. While the spring does result in the loss of a couple of inches, thereby preventing you from being able to put it all of the way down, it also adds more cushion to the drop. If you drop the bar while doing rows, RDLs or anything similar, you will find that it does not stop on a dime.

Multi-Grip Pull Bar

The Multi-Grip Pull Bar on this machine features a lot of laser etching on the outside, front and sides. With the G-series, the Chin Up and Pull Up station features knurled grip positions capable of accommodating close grip, wide grip, overhand and underhand movements. The Multi-Grip Dip Handle attachment allows you to use different grips and grip widths so you can build mass in your upper body. Not only can the system can be adjusted vertically on the front of the racks, but it also has a ring where you can attach weight belts and bands for added resistance. With a weight rating of 772 pounds, you are not likely to exceed the maximum capacity of this innovative system.

Weight Stacks

One major difference between the G15 model and the G10 is that the G15 has dual integrated 289-pound weight stacks that feature attractive covers with exercise charts. The weight stacks line up really nicely, but they do lift up at the top just a bit if you have a heavy attachment on the cables. In this case, you may need to use your hand to hold the pin down.

Plate Storage

The plate storage feature of this model is very helpful when it comes to saving space. This particular model offers four places for plate storage with no bumper plates in between. The lack of bumper plates is a nice feature because it helps to keep the footprint small while also preventing the weights from bumping into the bumper plates below them. The barbell storage feature, which is located in the back, also helps to save space with the system.

Included Attachments

The Force USA G15 All-In-One Trainer comes with numerous attachments as part of the base model. Some of these include:

Low Row Foot Plates – Measures 9” x 22” and is very easy to put together and attach. Can be attached to the front of either upright on the front of the rack. Features a black powder-coated finish and slip-resistant surface.
Low Row Handle – Features more laser etching.
Multi-Grip Dip Handle – Allows you to use different grips and grip widths. Adjusts vertically on the front of the rack. Can be used with bands or weight belts for additional resistance.
Hex Collars – Three high-quality pairs, which would easily cost at least $45 if purchased separately.
Suspension Trainer – Stirrup station that makes it possible to complete more than 50 different exercises. Compatible with a heavy bag and resistance band packages to add even more versatility.
Triceps Push-Down Bar – Heavy grade system.
Rope Push-Down Bar
Safety Spotter Arms
J-Hooks/Cups
Four Plug/Position Single-Handed Cable
Cambered Bar – Curled version
Straight Bar

The bars that are included with the system also feature plenty of hooks for additional versatility.

Cable Pulley Ratios

Featuring the world’s first adjustable cable ratio system, the Force USA G15 All-In-One Trainer can quickly and easily be transformed from offering a 2:1 to a 4:1 ratio. With the 2:1 ratio, a user with 100 pounds loaded will only be lifting 50 pounds while transforming to the 4:1 ratio means the same load results in a 25-pound lift.

Thanks to the pulley system’s high tensile aircraft cables, which boast a 2,000-pound rating, the pulleys can easily and safely be adjusted vertically to 22 different height positions with just one hand. This feature makes it possible to access hundreds of functional training possibilities for achieving various strength-training goals. Overall, the functionality and safety of the system is superior to 1:1 systems while also offering a great system that works well for lifters of different levels.

Conclusion

Simply put, the Force USA G15 All-In-One Trainer truly is what it claims to be: an all-in-one system. It boasts a small footprint for all that it has to offer and it is made of high-quality materials and construction. Even when kept in an area with high humidity, the system remains maintenance-free and free of rust. With the many upgrades and additional attachments that are available for purchase separately, you are sure to meet all of your strength training needs with this one machine.

- EFFEICIENT FOOTPRINT FOR AN ALL IN ONE TRAINER
- LOTS OF INCLUDED ATTACHMENTS
- OPTIONAL UPGRADE KIT ADDS TO FUNCTIONALITY
- EXPENSIVE…BUT MOST ALL IN ONE TRAINERS AREN’T CHEAP
- 2:1 AND 4:1 CABLE PULLEY RATIOS CAN BE A DEALBREAKER FOR SOME
- ASSEMBLY TAKES A LONG TIME FOR THOSE THAT HAVEN’T HAD EXPERIENCE